Table of Contents
Advertisement
Figure 10-15: Cold restart using the device loader
Click Help for more information.
10.4.8
Cold restart from terminal mode
This procedure performs the cold start from the terminal mode. It causes the device to restart using
the startup (cold) configuration.
The procedure can be performed while on a local or remote connection, but it is highly recommended
that the cold restart is performed locally. Terminal mode can be invoked from entry mode or from the
PCCU splash screen. This method of cold restart requires you to type a command.
NOTICE - Loss of data: Perform the procedures in section
configuration
system reconfiguration. If the startup (cold) configuration does not have the latest network
connection configuration, the restart causes loss of network connectivity. Updating the
startup configuration (tfCold) avoids loss of network connection and reconfiguration.
To complete a cold restart in terminal mode:
Launch PCCU.
Click the Entry icon in the toolbar. The Entry screen displays.
Click Operate in the menu bar and select Communications>Terminal from the drop-
down list
(Figure
1 1 2 | XSE RIE S G5 | 2 10 60 2 6MNAA
before a cold start. This avoids loss of the data and the need for a complete
10-16). The Terminal screen displays.
10.1 Preserve data and
Advertisement
Table of Contents
