6.3
Options screen
6.3.1
Overview
In Options screen, you can change the appearance of
the Home view of the Softstarter and read Active faults/
protections and Active warnings.
Option screen includes these menus:
•
Edit home view
•
Active faults/ protections
•
Active warnings
Push
"Options" to enter the Options screen.
6.3.2
Edit home view
Path in menu:
Options
Edit home view
For navigation, see Figure 6.18.
Use Edit home view to change the view of the home view.
Add information screens to home view
6.3.2.1
1.
Push
"Options" to select Edit home view.
2.
Use the Navigation keys to select where you want
to add an information screen.
3.
Push
"Add" to add the new information screen
to the home view.
Edit information screens in home view
6.3.2.2
1.
Push
"Options" and then select Edit home
view.
2.
Use the Navigation keys to select the display slot
you want to edit.
3.
Push
"Edit" and enter the Display slot menu.
See
chapter
6.3.2.3 Display slot to set the new
screen in the Display slot menu.
Display slot
6.3.2.3
In the Display slot menu, you can set the new screen with
these options:
Signal
Push
"Edit" to see the list of signals available for the
home view. Use the Navigation keys and then push
"Select" to select the signal. Selected signal is shown by
1
in Figure 6.19.
Select 1 of these signals:
•
Empty
•
Motor voltage
•
Motor current
•
Active power
•
Active power (hp)
•
Power factor
•
Reactive power
•
Apparent power
•
Mains voltage
•
Mains frequency
•
Motor connection
•
Phase sequence
1SFC132081M0201
| Installation and commissioning manual | Human machine interface (HMI)
Options
Edit home view
Active faults
Active warnings
Configure HMI
Figure 6.18
Edit home view navigation
Local
PSTX
Motor current
1
0.0
2
Motor voltage
0.0
Options
12:00
Figure 6.19
Display slot
•
Phase L1 current
•
Phase L2 current
•
Phase L3 current
•
L1L2 phase-to-phase voltage
•
L2L3 phase-to-phase voltage
•
L3L1 phase-to-phase voltage
•
Thyristor temperature
•
Motor temperature
•
EOL time to trip
•
EOL time to cool
•
Active energy
•
Active energy (resettable)
•
Reactive energy
•
Reactive energy (resettable)
•
Voltage imbalance
•
Mains voltage THD
•
PT100 temperature
•
PTC resistance
•
Remaining time to start
•
Number of starts (resettable)
•
Number of starts
•
Motor run time (resettable)
•
Motor run time
•
Thyristor run time (resettable)
•
Thyristor run time
•
Fans run time
•
Pre-start function
•
Start mode
•
Stop mode
Local
PSTX HMI
Motor current
A
0.0
V
Motor voltage
0.0
Options
12:00
Menu
A
4
3
V
Menu
59
6