ABB PSTX Series Installation And Commissioning Manual page 81

7.4 Full voltage start
When using the full voltage start, the Softstarter increases
the motor speed as fast as possible. The motor voltage
ramps up to full voltage in ½ seconds.
INFORMATION
Full voltage start ignores the Current limit.
Configuration of the Full voltage start with these
parameters:
Parameter
02.01 Start mode
7.5 Direct stop
When using the Direct stop the output voltage to the
motor is 0.
Configuration of the Direct stop with these
parameters:
Parameter
02.02 Stop mode
Description
Set to Full voltage start.
Description
Set to No ramp.
1SFC132081M0201
Setting range
Voltage ramp,
Torque ramp,
Full voltage start
Setting range
No ramp,
Voltage stop
ramp, Torque
stop ramp,
Dynamic brake
| Installation and commissioning manual | Functions
Default value
Voltage ramp
7
Default value
Voltage ramp
81