Table of Contents
Advertisement
"SM" SIM/UICC phonebook
"ON" SIM/USIM own numbers (MSISDNs) list
"EN" SIM/USIM emergency number
<reserved>: Reserved.
<used>: Integer value. It indicates the number of entries in use in the currently
selected memory.
<total>: Integer value. It indicates the maximum number of entries in the currently
selected memory.
10.2 Phonebook reading %CPBR
10.2.1 Command Syntax
Command
%CPBR=<index1>
[,<index2>]
%CPBR=?
10.2.2 Description
This command returns the phonebook entries between positions index1 and index2 in
the currently selected phonebook memory. If no entry exists between index1 and
index2, the following will be returned:
+CME ERROR: not found
Alternatively, you can input index1 only, and only the phonebook entries in the position
index1 will be returned.
The TEST command returns the position range of the currently selected phonebook
memory, and the maximum length of <number>, <text> and <email>.
10.2.3 Defined Values
<index1>, <index2>, <index>: Integer value. It indicates the position in the phonebook
memory. The values of index1 and index2 are less than or equal to the "total" field
returned by the "+CPBS?" command.
<number>: String type, telephone number.
Issue 18 (2009-06-22)
Possible response(s)
[<CR><LF>%CPBR:
<index1>,<number>,<type>,<text>,<coding>[,<email>][[...]
<CR><LF>%CPBR:
<index2>,<number>,<type>,<text>],<coding>[,<email>]]<CR>
<LF>]<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>%CPBR:
<index>s),[<nlength>],[<tlength>],[<mlenth>]<CR><LF><CR>
<LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
(list
of
supported
Page 114 of 169
Advertisement
Table of Contents
