Data Buffer Query Command %Ipgetdata; Command Syntax; Description; Defined Values - Huawei EM770W At Command Interface Specification

13.5 Data buffer query command %IPGETDATA

13.5.1 Command Syntax

Command
%IPGETDATA=<index>
%IPGETDATA?
%IPGETDATA=?

13.5.2 Description

This command is used to query data buffer for users.The newest three packages are
buffered, it is convenience for users to query.

13.5.3 Defined Values

<index >: cache data index
0~2
<link_id>: link ID
1~5
<data_len>: 16-bit integer type, data length
<data>: user data

13.6 Arrival data notification %IPDATA

13.6.1 Command Syntax
Command
13.6.2 Description
This command is used to notify the user network of the arrival of valid data.
13.6.3 Defined Values
<link_id>: link ID
1~5
Issue 18 (2009-06-22)
the range of cache data index
the range of link ID.
the range of link ID
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Possible response(s)
<CR><LF>%IPGETDATA:
<index>,<link_id>,<data_len><CR><LF><data><
CR><LF><CR><LF>OK<CR><LF>
<CR><LF>%IPGETDATA: <index>,<link_id>,<
data_len >
<CR><LF><CR><LF>OK<CR><LF>
<CR><LF>%IPGETDATA:(0-2)
<CR><LF><CR><LF>OK<CR><LF>
Possible response(s)
<CR><LF>%IPDATA:<link_id>,<data_len>,<data
><CR><LF><CR><LF>OK<CR><LF>
Page 133 of 169