Interface Description; Defined Values; Module Automatic Resetting %Autoreset; Command Syntax - Huawei EM770W At Command Interface Specification

Command
%RESET=<delay_time>
%RESET?
%RESET=?

3.23.2 Interface Description

This command is used to delay to reset module by user.

3.23.3 Defined Values

<delay_time>: Delay time.
0: Disable the function of this command.
1~65535: Delay time, indicates in second.
Note: We can't use this command to reset module at FTM mode, it's need to switch
module to ONLINE mode to use the command again.

3.24 Module automatic resetting %AUTORESET

3.24.1 Command Syntax

Command
%AUTORESET=<auto_re
set_time >
% AUTORESET?
% AUTORESET =?
3.24.2 Interface Description
This command is used to periodically reset the module automatically.
3.24.3 Defined Values
<delay_time>: Delay time.
0: Disable the function of this command.
120~172800: Delay time, indicates in second. The interval is from two minutes to two
days.
Issue 18 (2009-06-22)
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF>%RESET:<delay_time><CR><LF><CR>
<LF>OK<CR><LF>
<CR><LF>%RESET:(range of supported
<delay_time>)<CR><LF><CR><LF>OK<CR><LF>
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF>% AUTORESET:< auto_reset_time
><CR><LF><CR><LF>OK<CR><LF>
<CR><LF>% AUTORESET:(range of supported
<delay_time>)<CR><LF><CR><LF>OK<CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 41 of 169