Stk Service Interface Description; Stk Set Facilities %Stsf; Command Syntax; Description - Huawei EM770W At Command Interface Specification

14

14.1 STK Set Facilities %STSF

14.1.1 Command Syntax

Command
%STSF=<mode>
%STSF?
%STSF=?

14.1.2 Description

This command is used to set STK functionality: enable and disable STK functionality.

14.1.3 Defined Values

<mode>: the mode of STK functionality

14.2 STK Indication %STIN

14.2.1 Command Syntax
Command
Issue 18 (2009-06-22)

STK Service Interface Description

0 disable the functionality(default)
1 enable the functionality
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Possible response(s)
OK
+CME ERROR:<err>
<CR><LF>%STSF:<Mode><CR><LF><CR><LF>O
K<CR><LF>
<CR><LF>%STSF:(list
<CR><LF><CR><LF>OK<CR><LF>
Possible response(s)
% STIN: <CmdType>,<CmdIndex>,<isTimeOut>
of supported <mode>s)
Page 145 of 169