5.1 Select the SMS type +CSMS
5.1.1 Command Syntax
Command
+CSMS=<service>
+CSMS?
+CSMS=?
5.1.2 Description
The SET command is used to set the message service type. The returned <mt>,
<mo> and <bm> mean whether this service type is supported for the messages
received by the terminal, messages sent by the terminal, and the broadcast
messages.
5.1.3 Defined Values
<service>: Message service type.
0
compatible with GSM 07.05 Phase 2 version 4.7.0)
1
compatible with GSM 07.05 Phase 2+ version; note: command AT+CNMA requires
<service> setting 1.)
Issue 18 (2009-06-22)
5
SMS Interface Description
3G TS 23.040, 3G TS 23.041 (the syntax of SMS AT commands is
3G TS 23.040, 3G TS 23.041 (the syntax of SMS AT commands is
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
Possible response(s)
<CR><LF>+CSMS:
<mt>,<mo>,<bm><CR><LF><CR><LF>OK<CR><L
F>
<CR><LF>+CSMS:
<service>,<mt>,<mo>,<bm><CR><LF><CR><LF>O
K<CR><LF>
<CR><LF>+CSMS: (list of supported
<service>s)<CR><LF><CR><LF>OK<CR><LF>
AT Command Interface Specification
Page 57 of 169