List Current Calls +Clcc; Command Syntax; Description; Defined Values - Huawei EM770W At Command Interface Specification

+CLIP:,129,,,,1
<CLI validity>=2 the unsolicited report will bes
+CLIP:,129,,,,2

4.7 List current calls +CLCC

4.7.1 Command Syntax

Command
+CLCC
+CLCC=?

4.7.2 Description

Returns list of current calls of MT. If command succeeds but no calls are available, no
information response is sent to TE.

4.7.3 Defined Values

<idx>: integer type; call identification number
<dir>:
0 mobile originated (MO) call
1 mobile terminated (MT) call
<stat> (state of the call):
0 active
1 held
2 dialing (MO call)
3 alerting (MO call)
4 incoming (MT call)
5 waiting (MT call)
<mode> (bearer/teleservice):
0 voice
1 data
Issue 18 (2009-06-22)
Possible response(s)
[<CR><LF>+CLCC: <id1>,<dir>,<stat>,<mode>,<mpty>[,
<number>,<type>[,<alpha>[,<priority>]]]
[<CR><LF>+CLCC: <id2>,<dir>,<stat>,<mode>,<mpty>[,
<number>,<type>[,<alpha>[,<priority>]]]
[...]]<CR><LF>]<CR><LF>OK<CR><LF>
<CR><LF>OK<CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 55 of 169