Operator Selection +Cops; Command Syntax; Interface Description - Huawei EM770W At Command Interface Specification

2
<stat>:
0
1
2
3
4
5
<lac>: Position code information, composed of four characters and expressed in
hexadecimal. (Example: "00C3"= "195" in decimal)
<ci>: Cell information, composed of four characters and expressed in hexadecimal.
Extended Information: according 3GPP Rel7, four characters are requested, but if
before Rel7, for example the currently network is Rel6 mostly, only the last two
characters is valid, the other characters is invalid and should be ignored. For example,
if the <CI> return 3B3DE1C, only DE1C is valid and could be used as DE1C is the last
two characters.

12.3 Operator selection +COPS

12.3.1 Command Syntax

Command
+COPS=[<mode>[,<format
>
[,<oper>[,< rat>]]]]
+COPS?
+COPS=?

12.3.2 Interface Description

Issue 18 (2009-06-22)
Enable proactive reporting of "+CGREG: <stat>[,<lac>,<ci>]"..
Not registered. The MS is not searching the new operators to be registered.
Local network is registered
Not registered. But the MS is searching the new operators to be registered.
Registration rejected
Unknown reasons
Roaming network is registered
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+COPS:
rat>]]<CR><LF><CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+COPS: [list of supported (<stat>,long
alphanumeric <oper>,short
<oper>,numeric <oper>[,< rat>])s][,,(list of supported
<mode>s),(list
<format>s)]<CR><LF>OK<CR><LF>
In case of CME error:
<CR><LF>+CME ERROR: <err><CR><LF>
<mode>[,<format>,<oper>[,<
alphanumeric
of supported
Page 127 of 169