11.1 RSSI change indication %RSSI
11.1.1 Command Syntax
Command
11.1.2 Description
When the change of RSSI is more than 5dBm, the MS will report this indication to the
TE.
11.1.3 Defined Values
<rssi>: Strength of the receiving signal. The values are defined as follows:
0
1
2...30
31 Equal to or higher than -51 dBm
99 Unknown or unmeasurable.
11.2 Unsolicited report control command %CURC
11.2.1 Command Syntax
Command
%CURC=<mode>
Issue 18 (2009-06-22)
11
Possible response(s)
<CR><LF>%RSSI: <rssi><CR><LF>
Equal to or less than -113 dBm
-111 dBm
-109... -53 dBm
Possible response(s)
<CR><LF>OK<CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
System Setting Interface
Description
Page 117 of 169