Mitsubishi Electric MELSEC Q Series User Manual page 142

(3) Deviation counter clearing program
This program clears the deviation counter to 0.
(a) Program detail
As X47 is turned on, the deviation counter is cleared to 0.
Deviation counter clear command
Cd.4
(b) Execution condition
I/O signal
(c) Device used by the user
Device
X47
D86
M10
(d) Program example
140
Item
Check item
WDT error, H/W error signal (X10)
BUSY signal (X14)
Error detection signal (X18)
Synchronization flag (X24)
Deviation counter clear command
Deviation counter clear request
Deviation counter clearing completion check
Setting detail
1: Clear the deviation counter
Condition
OFF
OFF
OFF
ON
Description
Deviation counter clear command
Command deviation counter clear to the
QD73A1.
Command to check the deviation counter
clear.
Completes clearing the deviation counter.
Note
