Mitsubishi Electric MELSEC Q Series User Manual page 178

(3) Deviation counter clearing program
This program clears the deviation counter to 0.
(a) Program detail
As X39 is turned on, the deviation counter is cleared to 0.
Deviation counter clear command
Cd.4
(b) Execution condition
I/O signal
(c) Device used by the user
Device
X39
D110
D111
M80
M81
M300
M301
M302
M303
(d) Program example
176
Item
Check item
WDT error, H/W error signal (X1020)
BUSY signal (X1024)
Error detection signal (X1028)
Synchronization flag (X1034)
Deviation counter clear command
Deviation counter clear request
Deviation counter clearing result check
Deviation counter clear
Deviation counter clearing completion check
Z(P).REMTO instruction completion
Z(P).REMTO instruction failure
Z(P).REMFR instruction completion
Z(P).REMFR instruction failure
Setting detail
1: Clear the deviation counter
Condition
OFF
OFF
OFF
ON
Description
Command deviation counter clear.
Deviation counter clear command
Command deviation counter clear to the
QD73A1.
Completes the deviation counter clear
command.
Command to check the deviation counter
clear.
Read the completion of deviation counter
clear from the QD73A1.
Completes reading the deviation counter
clear.
Command to check the deviation counter
clear again when it is incomplete.
Note
