Huawei FusionModule1000A20 Installation Manual page 85

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)
Prerequisites



Preparations
Tool: wrench dedicated for the feeder window
Materials: waterproof silicone sealant, rubber sealing strip
Document: none
Skill requirement: skilled technicians
Procedure
Step 1 Remove the waterproof metal connector by using the dedicated wrench delivered with the
container, and take the plug out of the connector.
Figure 10-11 Disassembling a waterproof metal connector
(1) Plug
Step 2 Route a cable into the container through the waterproof metal connector, as shown in
10-12.
Issue 02 (2017-01-10)
The outdoor area without shelters is free from bad weather condition such as raining,
sandstorm, strong wind, or snowing.
Cables have been mounted on cable trays.
Cables need to be routed into a feeder window using waterproof metal connectors.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Cable Installation Techniques
Figure
78