Figure 8-34 Ethernet Coaxial Cable Ground Terminal; Figure 8-35 Ethernet Transceiver Cable - Hitachi S10mini User Manual

(6) Coaxial cable ground terminal
This terminal is used to prevent a communication data error from being caused by noise
contained in a coaxial cable. Ensure that the coaxial cable ground terminal is connected to a
coaxial cable at one point. Provide Class D grounding.

Figure 8-34 Ethernet Coaxial Cable Ground Terminal

(7) Transceiver cable
The transceiver cable is used to connect a node to a transceiver. This cable is terminated on
both ends with D-sub 15-pin AUI connectors. The maximum permissible transceiver cable
length is 50 m. However, it is recommended that you use a 15 m or shorter cable at FA sites
due to noise immunity considerations.
Node end
ノード側

Figure 8-35 Ethernet Transceiver Cable

アース端子
8-43
8 APPENDIXES
Transceiver end
トランシーバ側