Hitachi S10mini User Manual page 127

Parameter
Message transmission service
number
Remote node number
Error code storage address
(*) For the relationship between real address on LPU (memory address) and symbol
name such as XW000, see "Table 2-5 Virtual Address Spare and Symbol Names."
"Memory address" in table is the address to be specified.
[Return code] (for C mode handler only)
0 (0x00000000): Normal termination
-1 (0xFFFFFFFF): Parameter abnormality exists or the handler is busy processing another
message. Error code is stored in area which specified error code storage
address. For content and measure of error code, see "Table 7-7 List of
Detectable Codes."
-2 (0xFFFFFFFE): When mounting S10V, specifies real address (0x01000000 to 0xFFFFFFFE)
on CMU at error code storage address. Please review the specified
address.
[Function]
A run request will be issued to a remote node.
The FL.NET module does not support the server feature for a run directive. If a
run request is issued to the FL.NET module, it returns a response to indicate that
it does not support the run directive.
Input range
8 (only when a mathematical/logical function is
used)
1 to 254
Specify a real address (even-numbered address)
on the CPU or LPU. (*)
5-75
5 USER GUIDE