5 USER GUIDE
5.5.4 Changing connections
Function: Set the communication type between the PCs and the PC.
Operation: The procedure is shown below.
(1) From the [Tool] menu of the [FL.NET] window or [[S10V] FL.NET] window, click the
Change connection
(2) The [Communication type] window is displayed.
(Where the type of the controller used is S10V, the [Communication type] window will also be
displayed automatically when the operation mode is switched from offline to online by
choosing [Online] from the [Module] menu.)
(3) When the communication type is RS-232C, click the [RS-232C] radio button and then select
"communication port."
(4) When the communication type is Ethernet, click the [Ethernet] radio button and then enter the
"IP address" of the connection destination.
button.
5-132