Figure 8-57 Securing The Transceiver Body And Tap; Table 8-16 Sqe Switch Settings - Hitachi S10mini User Manual

8 APPENDIXES
⑦ If the shield pressure-connecting pin and conductor probe seem to be improperly
positioned, pull them out after their insertion. If they are not accurately inserted, their
bends are visible. In such a situation, accomplish centering again, insert the tap
retaining screw into the hole in the top of the transceiver body, and tighten it.
(d) Setting the SQE switch
Table 8-16 shows the SQE switch settings.
When connected to a node
When connected to a repeater
When connected to an optical repeater
When connected to a router
When connected to a multiport transceiver
When connected to a bridge
When connected to a hub (multiport repeater)

Figure 8-57 Securing the Transceiver Body and Tap

Table 8-16 SQE Switch Settings

Item
8-56
Setting
ON
OFF
OFF
ON
OFF
OFF
OFF