Hitachi S10mini User Manual page 193

5.6.5 Network status
Function: Display the status when joining the network including the allowable refresh cycle time.
For using this function, it is a prerequisite that the PCs is connected to the PC by cable.
Operation: The procedure is shown below.
(1) Select [Main] or [Sub] from the [Module] menu of the [FL.NET] window or [[S10V] FL.NET]
window.
(2) Select the [Network] menu.
(3) The [All Networks] icon and each node No. icon connected to the network are displayed.
(4) Double-click the [All Networks] icon.
(5) The [Network status] window is displayed.
(6) Click the Start monitoring
Click the Node setting list
nodes.
Click the Close
Double-click
button to monitor the network status.
button to display the PCs allocation and current values of all
button to exit the [Network status] window.
5-141
5 USER GUIDE