Hitachi S10mini User Manual page 102

5 USER GUIDE
To set up the FA link status/higher layer flag area, use the setup window for the other nodes
reception setup.
Figure 5-44 Setup Window for Setting the Status Flag Areas for the
The table below shows the acceptable input ranges for the input items.
Input item
FA link status
Higher layer status
For the on-screen information (bit allocation) concerning the FA link status and higher layer
status, see "5.4.6 Using the management tables."
Shows the self-node number area setup.
Enter the FA link and higher layer status settings.
Other Nodes Reception Setup
Description
Specify the area to which the FA link
status of the node having the node
number indicated at the left end is to be
transferred (the area size is 1 word).
Specify the area to which the higher
layer status of the node having the node
number indicated at the left end is to be
transferred (the area size is 1 word).
See Table 5-7, "Address Ranges for
Common Memory Area Allocation in CPU
or LPU Memory."
See Table 5-7, "Address Ranges for
Common Memory Area Allocation in CPU
or LPU Memory."
5-50
Make an entry
specifying the FA link
status transfer area
for each node.
Make an entry
specifying the higher
layer status transfer
area for each node.
Acceptable input range