Logging In To The Ibmc Webui - Huawei E9000 Troubleshooting Manual

Huawei Servers
Troubleshooting
Step 5 On the iMana 200 login page, enter the username and password.
Step 6 Select This iMana from the Log on to drop-down list.
Step 7 Click Log In.
The Overview page is displayed. The login username is displayed in the upper
right corner of the page.
----End

8.9 Logging In to the iBMC WebUI

Scenarios
Log in to the iBMC WebUI by using a browser on the local PC.
Prerequisites
Conditions
The local PC that uses the remote control function must have the Java runtime
environment (JRE) and the browser of the required version. For details, see the
corresponding
Ensure that the local PC meets the following networking conditions:
●
●
Data
Table 8-4
Table 8-4 Required data
Type
User
login
informa
tion
Issue 20 (2020-09-25)
NO TE
The user account will be locked after five consecutive login failures caused by incorrect
passwords. If your user account is locked, log in again 5 minutes later.
NO TE
You can click Reset to clear the information entered on the User Login page.
iBMC User
The local PC is connected to the iBMC management network port on the
server by using a network cable.
The IP addresses of the local PC and the iBMC management network port are
on the same network segment.
lists the required data before you log in to the iBMC WebUI.
Paramet Description
er
User Username for logging in to the iBMC
name WebUI.
Copyright © Huawei Technologies Co., Ltd.
Guide.
8 Common Operations
Example
root
143