Using Winscp To Transfer Files - Huawei E9000 Troubleshooting Manual

Huawei Servers
Troubleshooting
In this document, PuTTY is used as the SSH tool. For details, see
to a Server Over a Network Port by Using
Step 2 Run the ipmcget -l blade
cominfo command to query the SOL port information of the compute node, pass
through module, or switch module.
Step 3 Run the ipmcset -l blade
sol -d activate -v com_value command to enter the serial port input interface.
Step 4 Enter the username and password as prompted.
----End

8.19 Using WinSCP to Transfer Files

Scenarios
Use WinSCP to transfer files from a PC to a server.
Prerequisites
Conditions
The Secure File Transfer Protocol (SFTP) service has been enabled on the
destination device.
Data
You have obtained the following data:
●
●
Software Tools
WinSCP.exe: This tool is third-party software. You need to prepare it by yourself.
Procedure
Step 1 Open the WinSCP folder, and double-click WinSCP.exe.
The WinSCP Login dialog box is displayed, as shown in
Issue 20 (2020-09-25)
You have obtained the IP address of the server to be connected.
You have obtained the user name and password for logging in to the server to
be connected.
NO TE
To change the UI language, click Languages.
Copyright © Huawei Technologies Co., Ltd.
PuTTY.
N -t SOL -d cominfo or ipmcget -l swi N -t SOL -d
N -t sol -d activate -v com_value or ipmcset -l swi N -t
8 Common Operations
8.15 Logging In
Figure 8-41.
171