Huawei E9000 Troubleshooting Manual page 178

Huawei Servers
Troubleshooting
If you need to disconnect the service terminal or server power after logging in to
the SOL screen, exit the SOL screen first. Otherwise, re-logging in to the SOL
screen will fail.
Step 3 Enter the user name and password.
The screen for selecting a slot number is displayed.
Log in Success!
*=====================================================================================
======================
COM#(n)
*=====================================================================================
======================
Blade1~Blade16(1 ~ 16)
Blade1A~Blade16A(17 ~ 32)
Swi1~Swi4(33 ~ 36)
Please input your choice:
The numbers in the preceding information are described as follows:
●
●
Step 4 Enter the slot number of the compute node, passthrough module, or switch
module, and press Enter.
●
●
Issue 20 (2020-09-25)
NO TICE
please input the SOL Blade1~Blade16(1 ~ 16), Blade1A~Blade16A(17 ~ 32), Swi1~Swi4(33 ~ 36) and
press Ctrl+R to return
1 to 32 indicate the compute nodes in slots 1 to 32, respectively.
33 to 36 indicate the switch modules in slots 1E, 2X, 3X, and 4E, respectively.
If you enter a compute node slot number, the following serial port
information is displayed:
1 systemcom
2 RAIDcom
3 BMCcom
4 Exboardcom
Or
1 SYS COM
2 BMC COM
Or
1 systemcom
2 BMCcom
If you enter a switch module slot number, the following serial port
information is displayed:
1 BMCcom
2 fabriccom
3 basecom
4 FCcom
Or
1 BMCcom
2 fabriccom
Or
1 BMCcom
2 fabriccom
3 basecom
Copyright © Huawei Technologies Co., Ltd.
8 Common Operations
169