Huawei E9000 Troubleshooting Manual page 42

Huawei Servers
Troubleshooting
The default username of the switching plane is admin, and the default password
is Huawei12#$.
Software Tools
mini-sftp-server.exe: used to transfer files between different platforms, for
example, from a switch module to a PC. This tool is third-party software. You need
to prepare it by yourself.
Procedure
Step 1 Configure an SFTP server.
For details, see
Step 2 Log in to the MX210 or MX220.
For details about how to access the FC switching plane CLI, see
to a Server Over a Network Port by Using PuTTY
Compute Node, Passthrough Module, or Switch Module by Using the SOL
Function of the
Step 3 Run the ipaddrset command to set the management IP address and then run the
ipaddrshow command to check whether the IP address is correct.
●
●
Issue 20 (2020-09-25)
8.21 Using SFTP to Transfer
MM910.
IPv4
FC_SW:admin> ipaddrset
Ethernet IP Address [10.77.77.77]:
Ethernet Subnetmask [255.255.255.0]:
Fibre Channel IP Addresss [none]:
Fibre Channel Subnetmask [none]:
Gateway IP Address [0.0.0.0]:
DHCP [Off]:
IP address is being changed...Done.
FC_SW:admin> ipaddrshow
FC_SW:admin> ipaddrshow
Ethernet IP Address: 10.32.53.47
Ethernet Subnetmask: 255.255.240.0
Fibre Channel IP Addresss: none
Fibre Channel Subnetmask: none
Gateway IP Address 10.32.48.1
DHCP: Off
IPv6
FC_SW:admin> ipaddrset -ipv6 --add
IP address is being changed...Done.
FC_SW:admin> ipaddrshow
SWITCH
Ethernet IP Address: 10.20.24.55
Ethernet Subnetmask: 255.255.240.0
Gateway IP Address: 10.20.16.1
DHCP: Off
IPv6 Autoconfiguration Enabled: No
Local IPv6 Addresses:
static fd00:60:69bc:82:205:33ff:fed7:f6fe/64 preferred
IPv6 Gateways: fe80:21b:3dff:fe0b:7800 fe80:21b:edff:fe0b:2400
Copyright © Huawei Technologies Co., Ltd.
Files.
or
10.32.53.47
255.255.240.0
10.32.48.1
fd00:60:69bc:82:205:33ff:fed7:f6fe/64
4 Collecting Information
8.15 Logging In
8.17 Logging In to a
33