ABB ACH580 Series Installation, Operation And Maintenance Manual page 118

118
Bypass status listing
DRIVE/BYPASS?
SAFETIES?
RUN PERMISSIVES?
START REQUEST?
AUTO TRANSFER?
BYP OVERRIDE 1?
BYP OVERRIDE 2?
DRIVE FAULTED?
BYPASS FAULTED?
SYSTEM STARTED?
SYSTEM RUNNING?
BYPASS WARNINGS?
HAND/OFF/AUTO?
ACH580-3BCR/BDR
ACH580 Ultra-Low Harmonic Drives Installation, Operation and Maintenance Manual
Bypass Status
(16 Characters)
Condition
DRIVE SELECTED Displays which one is selected, drive or
BYPASS SELECTED bypass
OPEN Displays if safeties (=INTERLOCK 1 and/
CLOSED or INTERLOCK 2) have been applied, or
if they are missing
OPEN Displays if PERMISSIVE is present or
CLOSED not
NOT PRESENT Displays if start request has been applied
PRESENT to the system
NOT TRANSFERRED Displays if the system is in Auto Transfer
TRANSFERRED state or not. Does not reflect to PAR
16.08 AUTO XFER value itself
NOT ACTIVATED Status of Override 1
ACTIVATED
NOT ACTIVATED Status of Override 2
ACTIVATED
NO Displays if drive is faulted or not
YES
NO Displays if bypass is faulted or not
YES
NO Displays if system is started or not
YES
NO Displays if system is running or not
YES
NO WARNINGS Displays if there is an active warning(s)
WARNING ACTIVE in bypass or not
OFF MODE Displays operating mode of the bypass -
HAND MODE OFF, HAND or AUTO
AUTO MODE
Description