ABB ACH580 Series Installation, Operation And Maintenance Manual page 48

48
2
3
4
5
6
7
ACH580 Ultra-Low Harmonic Drives Installation
ACH580 Ultra-Low Harmonic Drives Installation, Operation and Maintenance Manual
Select Motor and press
If the control modes is scalar, select Control mode and
press (Select) (or
Select Vector control and press
Warning message Identification run is shown for a
moment.
Check the motor speed limits. The following must be true:
Minimum speed < 0 rpm
Maximum speed = motor rated speed.
Check the motor current as well as torque limits. The
following must be true:
Maximum current > I
HD
Maximum torque > 50%.
(Select) (or ).
) and continue to the next step.
(Select) (or ).