ABB ACH580 Series Installation, Operation And Maintenance Manual page 40

40
3
4
5
6
ACH580 Ultra-Low Harmonic Drives Installation
ACH580 Ultra-Low Harmonic Drives Installation, Operation and Maintenance Manual
Select the supply voltage with parameter 95.01 Supply
Voltage:
• In the First start assistant menu, select Exit and press
(Next).
• In the Home view, press
Main menu.
• In the Main menu, go to Parameters > Complete list
> 95 HW configuration by selecting the correct row
and pressing (Select) repeatedly.
• Select parameter 95.01 Supply voltage and press
(Edit).
• Select supply voltage 380...415 V or 440...480 V and
press (Save).
• Go back to the Main menu by pressing
repeatedly.
• In the Main menu, select First start assistant and
press (Select) to enter the First start assistant
menu.
• Continue with the following steps for commissioning
the ACH580.
Select Commission the ACH580 and press
Select the localization you want to use and press
(Next).
Change the units shown on the panel if needed.
Go to the edit view of a selected row by pressing
Scroll the view with and
Go to the next view by pressing
(Menu) to enter the
(Back)
(Next).
.
.
(Next).