Cooling System - Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description (380 V)
Indicator
Alarm
Networking Switch
Table 3-31 Networking switch description
Name
Button pressing
Button holding
down

3.3 Cooling System

Features


Issue 04 (2017-06-30)
Color Silk
Screen
Red ALM
 If an indicator blinks at long intervals, it is blinking on for 1s and then off for 1s.
 If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
 If both the red and green indicators light up at the same time, orange effect may be generated.
Definition
Press the button for less
than 5s.
Hold down the button
for more than 5s.
Supports L1/L2 linkage and teamwork control for the indoor units.
Operates under T1 and T3 environment and extremely low temperature environment.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Description
Off The BIM is not faulty.

Blinking at Network parameters are being
super short cleared.
intervals

The BIM is blinking.
Steady on  The BIM is measuring the
battery internal resistance.

The BIM is faulty.

Communication with the CIM
times out.

No network is connected. (The
BIM is waiting to connect to a
network.)
Function
Searches for and joins a network if there is no
network. Initializes parameters of a network
if there is a network.
Clears the present network and resets the
wireless module.
3 System Architecture
57