Huawei FusionModule2000 Product Description page 95

FusionModule2000 Smart Modular Data Center
Product Description (380 V)
Table 3-52 ECC800 technical specifications
Item
Power input
Power output
FE port expansion
RS485 serial port
expansion
AI/DI expansion
(RJ45)
DO expansion
(RJ45)
Wireless
communication
3G (optional)
USB
Button
Indicators
Table 3-53 Indicators on the ECC800 main control module
Indicator
Issue 04 (2017-06-30)
Specifications

Supports two AC inputs

Rated voltage: 200–240 V AC/100–120 V AC

Rated frequency: 50 Hz/60 Hz
 Output voltage: 42–58 V DC (rated voltage: 53.5 V DC)
 Output power of two power supplies: 2000 W (176–300 V AC);
940 W (linear derating at 85–175 V AC)
 Output power of a single power supply: 1000 W (176–300 V
AC); 470 W (linear derating at 85–175 V AC)
Supports two WAN ports, two LAN ports, and 10/100M
communications rate
 Supports four RS485 ports with the default communications rate
of 9600 bit/s.

Each port provides 12 V DC power with the rated current of 450
mA.
 Supports six AI/DI ports to connect to smoke sensors, water
sensors, and temperature sensors.

Each port provides 12 V DC power with the rated current of 85
mA.
Two DO ports. Each port supports passive and active DO.
 Supports passive (dry contact) DO ports with contact point
capacity of 20 W, maximum withstand voltage of 60 V DC, and
rated current of 500 mA.

Supports active DO ports with the output voltage of 12 V DC
and output current of 450 mA.
Supports wireless communication that complies with
IEEE802.15.4.
Supports 3G (WCDMA) communication and is compatible with 2G
(GSM) communication. A standard SIM card slot is provided.
NOTE
The prerequisite for using a SIM card is that the site has signal coverage.
Provides a general USB port.

SW: wireless network pairing button
 Default: restores the default IP address
Color Name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 System Architecture
Status Description
88