Huawei FusionModule2000 Product Description page 96

FusionModule2000 Smart Modular Data Center
Product Description (380 V)
Indicator
RUN
ALM
3G
RF_Z
Issue 04 (2017-06-30)
Color Name
Green Running status
indicator
Red Alarm indicator
Green 3G status
indicator
Green Communication
status indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 System Architecture
Status Description
Steady on The power supply is normal,
the program is being loaded,
or WiFi WPS is pairing.
Off The power supply is
abnormal.
Blinking at The software runs properly
long (the indicator blinks at 0.5
intervals Hz, on for 1s and then off
for 1s) or the ECC800
registers with the NetEco
successfully.
Blinking at The ECC800 does not
short register with the NetEco (the
intervals indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Steady on The 3G module is powered
on.
Off The 3G module stops
running, or no 3G module is
configured.
Blinking at The 3G module succeeds in
long dial-up (the indicator blinks
intervals at 0.5 Hz, on for 1s and then
off for 1s).
Blinking at The 3G module registers
short with the operator network
intervals successfully (the indicator
blinks at 4 Hz, on for 0.125s
and then off for 0.125s).
Steady on No network parameters
exist, or a network is to be
created.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at A network is set up, and
super short node access is allowed (the
intervals indicator blinks at 10 Hz, on
for 0.05s and then off for
89