Siemens SINUMERIK 840D sl Programming Manual page 546

Tables
16.5 Predefined subroutine calls
24. Tool management
Keyword / 1st parameter
subroutine
identifier
DELT STRING[32]: Tool
designation
GETSELT VAR INT:
T number (return
value)
SETPIECE INT: Count
SETDNO INT: Tool number T INT: Tool
DZERO
DELDL INT: Tool number T INT: D no.
SETMTH INT: Tool-holder
no.
POSM INT: Location no.
for positioning
SETTIA VAR INT: Status =
result of the
operation
(return value)
SETTA VAR INT: Status =
result of the
operation
(return value)
RESETMON VAR INT: Status =
result of the
operation
(return value)
546
2nd 3rd
parameter parameter
INT: Duplo
number
INT: Spindle
number
INT: Spindle
number
INT: D no.
edge no.
INT: No. of INT:
the magazine Location
to be moved number of
the internal
magazine
INT: INT: Wear
Magazine group no.
number
INT: INT: Wear
Magazine group no.
number
INT: Internal T INT: D no. of
no. tool
Explanation
Delete tool. Duplo number can be
omitted.
Get selected T number. If no spindle
number is specified, the command
for the master spindle applies.
Takes account of set piece number
for all tools assigned to the spindle.
If no spindle number is specified, the
command for the master spindle
applies.
Set D no. of tool (T) and its tool edge
to new.
Set D numbers of all tools of the TO
unit assigned to the channel to
invalid
Delete all additive offsets of the tool
edge (or of a tool if D is not
specified).
Set toolholder no.
INT: Position magazine
Magazine
number of
the internal
magazine
Deactivate tool from wear group
Activate tool from wear group
Set actual value of tool to setpoint
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals