Drills - Siemens SINUMERIK 840D sl Programming Manual

5.5.3

Drills

The following tool types are available in the "Drills" group:
200
205
210
220
230
231
240
241
242
250
Tool parameters
The following figure provides an overview of which tool parameters (DP...) for drills are
entered in the compensation memory:
Note
Brief description of the tool parameters can be found on the user interface.
For further information, see:
References:
Function Manual, Basic Functions; Tool Offset (W1)
Fundamentals
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Twist drill
Drill
Boring bar
Center drill
Countersink
Counterbore
Tap regular thread
Tap fine thread
Tap Whitworth thread
Reamer
Tool offsets
5.5 Tool types
73