Mitsubishi Electric MELSEC iQ-R Series User Manual page 37

Communications with different networks
This function performs the transient transmission seamlessly to stations on different networks using dedicated instructions
and the engineering tool.
Engineering tool
Ethernet
Network No.3
Communications can be made with stations up to eight networks apart (number of relay stations: 7).
When the networks consist of only MELSEC iQ-R series
Communication paths are automatically set for communication with the following networks of MELSEC iQ-R series.
• Ethernet
• CC-Link IE TSN
• CC-Link IE Controller Network
• CC-Link IE Field Network
• MELSECNET/H
■Setting method
Check that "Dynamic Routing" in "Application Settings" is set to "Enable".
• Communication paths are automatically set, but they can also be manually set. (Page 36 When the
networks consist of MELSEC iQ-R series and other series)
• Communication paths cannot be automatically set to Ethernet-equipped modules connected via a router.
Set communication paths manually for such modules. (Page 36 When the networks consist of MELSEC
iQ-R series and other series)
RJ71LP21-25
Network No.1
CC-Link IE Field Network
Network No.2
(Relay station)
1.2 Transient Transmission Function
1
1 FUNCTIONS
35