5.
Set the items in "Required Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71LP21-25] [Required Settings]
6.
Set the link refresh settings as follows and click the [Apply] button.
[Navigation window] [Parameter] [Module Information] [RJ71LP21-25] [Basic Settings] [Link Refresh
Settings] [Detailed Setting]
7.
Write the set parameters to the CPU module of the normal station. Then reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
3 PROGRAMMING
86
3.2 Program Examples of the Redundant System