Mitsubishi Electric MELSEC iQ-R Series User Manual page 64

Melsecnet/h network module
Hide thumbs Also See for MELSEC iQ-R Series:
Table of Contents

Advertisement

Item
1 to 64
Link Side
Device Name
Points
Start
End
CPU Side
Target
Device Name
Points
Start
End
2 PARAMETER SETTINGS
62
2.3 Basic Settings
Description
Set the link refresh ranges of LB, LW, LX, and LY. Up to 64 ranges can be set.
Set the number of link refresh points for LB, LW, LX, and LY.
When "Start/End" is set for "Device Assignment Method", the number of link
refresh points (decimal) is displayed.
Set the device number of LB, LW, LX, and LY that are to be at the start of the link
refresh range.
Set the device number of LB, LW, LX, and LY that are to be at the end of the link
refresh range.
When "Points/Start" is set for "Device Assignment Method", the end of the link
refresh range is displayed.
Set the memory of the CPU module that is to perform link refresh.
Set the CPU module device for which link refresh is to be performed.
The number of points (decimal) in the link refresh range of the CPU module
device is displayed.
Set the device number of the CPU module that is to be at the start of the link
refresh range.
The device number of the final CPU module in the link refresh range is
displayed.
Setting range
• LB
• LW
• LX
• LY
Default: Blank
LB:
MELSECNET/H mode,
MELSECNET/H extended
mode: 16 to 16384
MELSECNET/10 mode: 16 to
8192
LW:
MELSECNET/H mode,
MELSECNET/H extended
mode: 1 to 16384
MELSECNET/10 mode: 1 to
8192
• LX, LY: 16 to 8192
Default: Blank
LB:
MELSECNET/H mode,
MELSECNET/H extended
mode: 00000H to 03FF0H
MELSECNET/10 mode: 00000H
to 01FF0H
• LW:
MELSECNET/H mode,
MELSECNET/H extended
mode: 00000H to 03FFFH
MELSECNET/10 mode: 00000H
to 01FFFH
• LX, LY: 00000H to 01FF0H
Default: Blank
• LB:
MELSECNET/H mode,
MELSECNET/H extended
mode: 0000FH to 03FFFH
MELSECNET/10 mode: 0000FH
to 01FFFH
• LW:
MELSECNET/H mode,
MELSECNET/H extended
mode: 00000H to 03FFFH
MELSECNET/10 mode: 00000H
to 01FFFH
• LX, LY: 0000FH to 01FFFH
Default: Blank
Specify Device (fixed)
• Specify Device: X, Y, M, L, B,
D, W, R, ZR, RD
Default: Blank
Follow the device setting of the
CPU parameter.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rj71lp21-25

Table of Contents