Siemens SIPROTEC 5 Manual page 110

Operation Using a Browser-Based User Interface
7.2 Operation
NOTE
i
i
Some Web browsers may have problems connecting to the specified IP address of the device; in this case,
delete the associated certificate in the Web browser.
Depending on the security configuration of the SIPROTEC 5 device, the following log-in dialogs are available:
•
Variant 1:
If you allocated a connection password in DIGSI 5 under Operations safety and access control, the login
dialog starts with the non-editable user name Siprotec 5. You must enter the connection password
configured in DIGSI as the password.
•
Variant 2:
If you have configured the role-based access control (RBAC) in DIGSI 5 under Operations safety and
access control, the login dialog starts with the request of the user name and password that you config-
ured on the RADIUS server.
•
Variant 3:
If you have configured neither the role-based access control nor the connection password, the login
dialog starts with the non-editable user name Siprotec 5. The text box for the password must remain
empty.
Once the Web browser is successfully connected to the device, the following login dialog (for Variant 2) will
appear, for example:
[scwebmonitor, 1, en_US]
Figure 7-2
•
Enter the user name in the text box User name.
•
Click into the text box Password and enter the password.
•
Select a language.
NOTE
i
i
If role-based access control (RBAC) is active, access is possible only after a successful user name and pass-
word authentication check.
You can find more information on this in the Security Manual.
NOTE
i
i
The language selection depends on the language set for the user interface of the device.
110
Login Dialog for the Browser-Based User Interface
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020