Siemens SIPROTEC 5 Manual page 249

[scgetrvw-250716-01, 1, en_US]
Figure 10-8
Concluding Firmware Update
NOTE
i
i
Before doing a firmware update of your SIPROTEC 5 device or the communication modules, back up the
data and the configuration of the device using DIGSI 5 via Connect device and retrieve data!
NOTE
i
i
The device will not carry out any functions during the update.
The update can take several minutes and the device can reboot several times. Do not shut off the device
under any conditions during the update.
Proceed as follows to complete the firmware update:
•
Click the device in the project tree.
•
Open the context menu.
•
Select the menu item Load firmware to device.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
Manage Device Drivers
Maintenance, On-the-Spot Assistance and Test
10.4 Update Firmware and Configuration
249