Operation Using a Browser-Based User Interface
7.3 Buttons
3 buttons are available:
•
Binary inputs:
An overview of the connected binary inputs is displayed via the Binary inputs button. You can display the
assignment of the binary inputs for this module by clicking a button in the left section (for example, base
module). You can find a detailed description with examples in chapter
[scwebmonitor10BI, 1, en_US]
Figure 7-24
•
Binary outputs:
An overview of the connected binary outputs is displayed via the Binary outputs button. You can display
the assignment of the binary outputs for this module by clicking a button in the left section (for example,
base module).
[scwebmonitor10BO, 1, en_US]
Figure 7-25
124
Assignment of Binary Inputs
Assignment of Binary Outputs
7.4.1
General.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020