Siemens SIPROTEC 5 Manual page 112

Operation Using a Browser-Based User Interface
7.2 Operation
Confirmation ID
You can activate the confirmation ID for editing device settings in DIGSI 5 under Operational safety and
access control. This is queried once, before the first changes are made to the device settings in the browser-
based user interface.
[scaccesscontr, 1, en_US]
Figure 7-6
If you have secured the changing of settings by a confirmation ID, the following dialog appears when a setting
is changed:
[scconfid, 1, --_--]
Figure 7-7
After entering the confirmation ID, the changed setting is adopted.
Other Buttons
Table 7-1
Button
112
Activation of the Confirmation ID
Query for the Confirmation ID
Overview of Buttons
Meaning
Use this button to log off (logout).
Use this button to adopt the changed parameter and save in the device.
Use this button to refresh the displayed page.
If you change device settings, read fault records, and perform other write-access
operations via the Web browser, you can check the result using this button. You
can leave the displayed list by clicking this button again.
Use these buttons to filter the displayed list or to delete the entire list.
Use this button to control an LED reset.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020