Operation in the Operating State
8.8 Change Device Settings
•
To reach the setting dialog for the language selection, press the function key <F9>.
•
Use the up/down navigation keys to select the languages.
•
Finally, confirm the setting changes with Ok.
Changing the Units System on the On-Site Operation Panel
•
To reach the settings dialog for selecting the units, select the Localization menu in Device functions.
•
To select the units system, press the Change softkey.
•
Use the Up/Down navigation keys to select the units system.
•
Finally, confirm the setting changes with Ok.
[scchgun1-050413-01.tif, 1, en_US]
Figure 8-51
[scchgun2-050413-01.tif, 1, en_US]
Figure 8-52
Changing the Device Language on the PC in DIGSI 5
•
To reach device information of your SIPROTEC 5 device in the menu, use the project-tree window. You
can reach the device optionally via online access or via the project in which it must be created:
Online access → Interface → Device → Device settings
Project → Device → Settings→ Device settings
•
In the project-tree window, click Device settings.
•
Select the language via the Operation-panel language parameter.
194
Units System of the Country
Switching the Units System
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020