Motor-Starting Log - Siemens SIPROTEC 5 Manual

Operation in the Operating State
8.5 Logs
[sc_comsuperv, 1, en_US]
Figure 8-31
Reading on the Device through the On-Site Operation Panel
•
To reach the communication-supervision log from the main menu, use the navigation keys on the on-site
operation panel.
Main menu → Logs → Com supervision log
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
[sc_comsupervlg, 1, en_US]
Figure 8-32
Deletability
The communication-supervision log of your SIPROTEC 5 device can be deleted. Read details about this in
chapter 8.5.12 Saving and Deleting the
Configurability
The communication-supervision log cannot be freely configured. The entries are preconfigured.

Motor-Starting Log

8.5.11
The motor-starting log records the starting current, starting voltage and the start duration each time a motor
starts. The motor-starting current and the motor-starting voltage are displayed as primary values. Up to 200
indications can be stored in the motor-starting log.
172
Reading the Communication-Supervision Log with DIGSI 5
Reading the Communication-Supervision Log on the On-Site Operation Panel of the Device
Logs.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020