Siemens SIPROTEC 5 Manual page 169

by the device-diagnosis log when the device is no longer ready for operation due to hardware defect or
compatibility problems and the fallback system is active.
Reading from the PC with DIGSI 5 in Normal Operation
•
To reach the device-diagnosis log of your SIPROTEC 5 device, use the project-tree window.
Project → Online access → Device → Device information → Logs tab → Device-diagnosis log
The status of the device-diagnosis log last loaded from the device is shown to you.
•
Before this, refresh the contents by clicking the update arrows in the headline.
[scdevdia-180816-01, 1, en_US]
Figure 8-27
Reading on the Device through the On-Site Operation Panel in Normal Operation
•
To reach the diagnosis log from the main menu, use the navigation keys of the on-site operation panel.
Main Menu → Test & Diagnosis → Logs → Device diagnosis
•
You can navigate on the on-site operation panel using the navigation keys (top/bottom) inside the
displayed indication list.
[scdevdia-280618, 1, en_US]
Figure 8-28
NOTE
i
i
•
The device-diagnosis log cannot be deleted!
•
The logged indications are preconfigured and cannot be changed!
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
Reading the Device-Diagnosis Log with DIGSI 5
Reading the Device-Diagnosis Log on the On-Site Operation Panel of the Device
Operation in the Operating State
8.5 Logs
169