Siemens SIPROTEC 5 Manual page 165

[schislog-090413-01.tif, 1, en_US]
Figure 8-21
Indication Categories in the Setting-History Log
For this log, there is selected information that is stored in case of successful as well as unsuccessful setting
changes. The following list gives you an overview of this information.
Table 8-7
Displayed Information
Selection edit+
Cancelation+
SG activation+
SG activation-
Set+
Confirmation+
Confirmation-
DCF uploaded
SG 1
SG 2
SG 3
SG 4
SG 5
SG 6
SG 7
SG 8
NOTE
i
i
•
The logged indications are preconfigured and cannot be changed!
•
The log, which is organized as a ring buffer, cannot be deleted by the user!
•
If you want to archive security-relevant information of the device without loss of information, you
must regularly read this log.
•
You cannot route additional indication objects to the setting-history log.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
Reading the Setting-History Log on the On-Site Operation Panel of the Device
Overview of Indication Types
Explanation
Selection of settings group to be edited
Cancelling of all changes successful
SG activation via command successful
SG activation via command failed
Parameter value was changed
Confirmation of change successful
Confirmation of change failed
DCF loaded into device
Settings group 1
Settings group 2
Settings group 3
Settings group 4
Settings group 5
Settings group 6
Settings group 7
Settings group 8
Operation in the Operating State
8.5 Logs
165