Huawei SmartDC V100R021C10 User Manual page 183

ECC800 Data Center Controller
User Manual
Step 2 For details about how to commission the camera and set parameters, see the
documents delivered with the device or the documents obtained by referring to
the "Preparing Documentation" section.
1.
2.
3.
Issue 04 (2021-10-09)
Settings
Set Use Pop-up Blocker to Disable.
Preview the site situation in real time and check the camera coverage through
videos. Adjust the lens if necessary.
Choose Settings > Network > TCP/IP, and set IPv4 address, IPv4 Subnet
mask, and IPv4 Gateway address for the camera according to the site plan.
Choose Settings > Video/Audio/Image > Video, and set camera stream
type, primary stream, and secondary stream 1 parameters, as shown in the
following figures.
NO TICE
Set the encoding protocol to H.265.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
Action
1. Choose Tools > Internet
Options.
The Internet Options dialog box
is displayed.
2. Click the Security tab.
3. Click Internet.
4. Click Custom level.
The Security Settings-Internet
Zone dialog box is displayed.
5. Set Use Pop-up Blocker to
Disable.
6. Click OK.
171