ECC800 Data Center Controller
User Manual
1.
2.
3.
----End
8.14 How Can I Handle Alarms?
Procedure
Step 1 Log in to the ECC800-Pro WebUI.
Step 2 Choose Home > Active Alarms and view active alarms.
Step 3 Select an alarm to be acknowledged and click Confirm.
Step 4 Handle an alarm based on the alarm information.
Step 5 Select an alarm to be cleared and click Clear Alarm.
----End
8.15 How Can I View Performance Data?
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Query > Performance Data.
Step 3 Set Device, Performance Data, Statistics Mode, Start time, and End Time, and
click Query.
----End
8.16 How Can I Change a Signal Name?
Context
●
●
Issue 04 (2021-10-09)
View historical alarms, choose Query > Historical Alarms. Set Device, Start
time, End time, Sort mode and Sorting By, and click Query.
To view access events, choose Query > Access Event.
To view operation logs, choose Query > Operation Log.
NO TE
The cleared alarm is displayed in the historical alarm list.
NO TE
The query result can be displayed in Table or Curve mode.
In this example, the smoke sensor is connected to the AI/DI_3 port on the
ECC800-Pro.
The following procedure describes how to change the signal name of AI/DI_3.
Other signal names can be changed in a similar way.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
360