Smart Module Actuator - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Table 3-38 LED indicator status
Indi
cato
r
RUN
ALM

3.2.5 Smart Module Actuator

The smart module actuator is applied in a smart module. It controls the lighting
inside the smart module through the access control system, host instructions,
infrared linkage information (disabled by default), or lighting button, and provides
a pad charging port. The smart module actuator can also control the rotating
skylight of the aisle based on the fire alarm linkage information or the host
control information, and opens the magnetic lock when detecting the card swiping
information of the card reader, exit button information, and fire linkage
information. In addition, the smart module actuator manages access rights,
records entrance and exit events, and records alarms.
Issue 04 (2021-10-09)
Color Name
Green Module
running
indicator
Red Alarm
indicator
Copyright © Huawei Technologies Co., Ltd.
Operat Status Description
ion
/ Blinki ● The door lock is paired
ng
● The door lock fails to
Off The power supply is
abnormal.
Press Blinki ● The indicator blinks at
SW. ng
interm
ittentl
y at
● The indicator blinks at
super
short
interv
als
/ Stead A system failure alarm is
y on generated.
Off The system is normal.
3 Device Description
with the host, and the
power supply is normal:
The indicator blinks at
0.5 Hz (on for 1s and
then off for 1s).
pair with the host: The
indicator blinks at 4 Hz
(on for 0.125s and then
off for 0.125s).
super short intervals for
0.5s, and then off for
0.5s.
super short intervals
(blinking at 10 Hz, on for
0.05s and then off for
0.05s). The cycle lasts for
5s.
44