How Can I Connect To A Wifi Network; How Can I Prepare And Log In The App - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual

8.41.1 How Can I Connect to a WiFi Network?

Procedure
Step 1 Connecting to a WiFi network.
Insert a WiFi module into the USB port on the ECC800-Pro.
Figure 8-39 Installing a WiFi module
----End

8.41.2 How Can I Prepare and Log in the App?

Prerequisites
App operating environment requirements:
●
●
●
●
Procedure
Step 1 Download and install the FusionModule app from Huawei AppGallery.
●
●
Issue 04 (2021-10-09)
The mobile device runs Android 6.0 or later and the operating system is not
rooted.
The mobile device has sufficient battery reserve.
You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
A PC with an IP address in the same network segment as that of the ECC800-
Pro is prepared, and the PC has connected to port WAN_1 on the ECC800-Pro.
NO TE
Before the installation, ensure that the PAD has connected to the Internet and the network
is running properly.
Huawei AppGallery installed on the PAD
Log in to the Huawei AppGallery client, search for FusionModule, and tap
Install. Huawei AppGallery is preinstalled on Huawei PAD by default.
Huawei AppGallery not installed on the PAD
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
385