How Can I Restore Factory Settings; How Can I Install A Network Security Certificate - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
3.
----End

8.8 How Can I Restore Factory Settings?

Context
Restoring factory settings will restore parameters to their default values. Back up
data before performing this operation. Perform this operation with caution.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Maintenance > Configuration File and click Restore Factory Settings.
Step 3 Enter the password currently used for logging in to the WebUI and click Submit.
----End

8.9 How Can I Install a Network Security Certificate?

Context
●
Issue 04 (2021-10-09)
Parameter
Device Type
Connect To
Communications
Port
Device Address
Click Test Connect to check whether the SMU11B is properly connected to
the ECC800-Pro.
– If the connection succeeds, click Confirm. The device connection
information is displayed in the Number of connected devices list.
– If the connection fails, check whether the device is properly connected to
the ECC800-Pro, whether the device and ECC800-Pro are running
properly, and whether the parameter settings are consistent with the
device parameters.
NO TICE
You have copied a network security certificate and its key you obtained to the
PC.
Copyright © Huawei Technologies Co., Ltd.
Setting
Set this parameter to SMU11B.
Set this parameter to ECC800.
Set this parameter to the number of the port
connected to the device. For example, if the SMU11B is
connected to the COM2 port on the ECC800-Pro, set
this parameter to COM2.
Set this parameter to the communications address of
the SMU11B.
8 FAQ
356