Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Figure 6-8: Linkload an Installed NIU/SCM Release—Erase Flash by Version Screen
Note:
Linkloads to NIUs and SCMs take a substantial period of time. The current status of the
linkload is displayed on the message bar.
To abort linkloads, enter
minutes of aborting the prior linkload.
A linkload is aborted automatically if a switchover occurs while the linkload was being
performed. Wait at least ten minutes before starting another linkload.
5.
To return to a previous menu or screen, press:
May 1998
at the main menu. Do not start another linkload within ten
<Ctrl + x>
<Ctrl + p>.
6880494G55-O
Software Linkload Commands
6-9
Advertisement
Table of Contents
