Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Setting Date and Time
This command is used to update the transmitter's real time clock with the time from the
RF-C!.
1.
From the Diagnostic menu, use the
Date & Time
Figure 5-10: Diagnostics Screen—Set Date and Time
The Set Date and Time screen appears (see Figure 5-11).
2.
Enter the date and time in this syntax: MMDDYYYY:hhmmss
•
MM: month (two digits)
•
DD: day (two digits)
•
YYYY: year (four digits)
•
: colon required
•
hh: hour (two digits)
May 1998
<tab>
and press:
(see Figure 5-10).
<Return>
6880494G55-O
to position the cursor to the left of the listing
Diagnostic Commands
Set
5-11
Advertisement
Table of Contents
